How to Fish a Senko Wacky Rigged Updated

How to Fish a Senko Wacky Rigged

What is a Weightless Wacky Rig Senko and why is it so effective?

‍

What is a Weightless Wacky Rig Senko?

A Wacky Rig is a finesse technique whereby 1 hooks a soft plastic in the center of its body, leaving two more than or less equal appendages on either side. Now as you can see from the image below, this is quite hands one of the least aesthetically appealing ways to rig a soft plastic. Practise yourself a favor and ignore that instinct, rigging a Senko like this is arguably the best style to catch numbers. Bass but cannot leave it alone and it really shines when the going gets tough!

‍

How to fish a Wacky Rig — Basic illustration of the Wacky Rig.

‍

Why is information technology so constructive?

‍

Unique action

The standout characteristic of a wacky rig senko is its falling action. Because the claw goes through the heart of the bait, the appendages shimmy and shake on either wide when the allurement is falling. This is peculiarly noticeable when using the original Gary Yamamoto Senko.

The Yamamoto Senko'southward loftier common salt content gives it hefty weight, a fast fall for a lure its size and exaggerated flailing of the bait's appendages, The consequence? Bass regularly hit this affair before it even hits the bottom of the lake.

‍

It stays in the strike one

One of the all-time things about the weightless wacky rig senko is its ability to stay in the strike zone. When line-fishing weighted presentations, your allurement falls to the bottom quicky, gets jerked once or twice and so pulled out of the strike zone again. While these faster presentations accept their place, sometimes you lot need to requite bass more time to look at your bait before they will bite.

This is where the weightless wacky senko shines. The bait falls gradually, giving bass plenty of time to watch it. This dwell fourth dimension coupled with the irresistible falling action is incredibly effective, especially when you are fishing areas y'all know concord fish/have practiced reason to believe hold fish.

‍

A cute Largemouth Bass caught on a 4 inch Junebug Gary Yamamoto Senko

‍

How to Wacky Rig a Senko?

‍

Pick your Senko size

First things start, pick the size of the Senko that you would like to rig. This of class is upwardly to personal preference and is dependent on where you are angling and how the fish are behaving. A adept starting point and by far the most popular pick is the 5-inch Senko. For more finicky bass you should consider sizing down to a 3 or iv-inch and if you are hunting for large fish get up to half dozen/7 inch.

Color selection is also central when selecting your Senko.

‍

Choose your hook

When it comes to choosing a hook, await for something with a short shank, wide gap and rounded. These hooks let the presentation of the bait to remain subtle and also enable dandy claw setting ability. It is as well important to notation that in that location are now many weedless variations of such hooks on the market.

If you lot are going to be throwing a wacky rig in cover, consider one of these options. If y'all are angling open h2o cull a hook without a weed guard as information technology will always look improve/more natural and allow for ameliorate hook sets than one with a weed guard.

At that place are also weighted hook options, but here, nosotros're focusing on the weightless wacky rig

In terms of size, apply the smallest hook y'all can get abroad with, 1/0 is a proficient starting point.

There is no correct or wrong here only some of my favorite hooks for this presentation are the following:

‍

Non-weedless

Weedless

‍

Putting them together

Once you have chosen your Senko and tied your hook on, all you need to do is claw the bait through the egg sac in the eye of the bait. That's it!

Now if yous are looking to go the most out of your Senko'due south you may want to consider using an O-ring or a cable tie in the middle of the bait and threading the hook through the. This volition prevent the bait from trigger-happy on the claw set and as a result you will go more fish per Senko.

Probably the most pop way to employ an O band to wacky rig senkos if with a Wacky Rig Tool. These piffling devices make it easy to thread O rings onto your senko.

‍

Best Wacky Rig Setup?

‍

Spinning setup

Because this is a finesse setup commonly fished on lighter line, spinning setups tend to be the most popular selection for weightless wacky senko angling. Go with medium to medium-heavy power rod depending on the line you are using.

In terms of line, you either want to go with directly fluorocarbon (six-10lb) or accept braid (15-20lb) to fluorocarbon leader (half dozen-10lb).

Now my personal preference here is to go direct fluorocarbon with a medium power spinning rod. This gives me crawly castability with the added benefit that I do not accept to fish with a leader knot. Fluorocarbon also sinks which helps me get the bait to the bottom faster. My go to fluorocarbon for this presentation is 8lb Berkley Trilene XL Pro Course. It is extremely supple which makes information technology very manageable on a spinning setup.

‍

Baitcasting setup

For larger wacky senkos (5 inches and upwards) you should have no problem line-fishing on a baitcasting setup. Go with a medium to medium-heavy casting rod and straight fluorocarbon (10-12lb) or complect to a fluorocarbon leader (x-12lb).

Again my personal preference here is straight fluorocarbon because of the castability, lack of a leader knot and sink rate. My favorite line for this technique is 10-12lb Seaguar InvizX.

‍

How to Fish a Wacky Rigged Senko?

Now that yous have your Senko rigged upwards it's fourth dimension to put it to use. This is an incredibly easy technique to catch fish on once you accept grasped the basics. I have created a step by stride guide below to take yous through the process of a total cast and retrieve of a wacky rig Senko.

‍

The cast

Option your target and make as accurate a cast as possible. The wacky senko frequently gets taken on the fall if you lot are able to drop the allurement very close to bass.

‍

The fall & strike

This is ordinarily when the activeness happens. Permit your senko to drop on a semi-slack line. This part is very of import as a semi-slack line ensures that the bait falls straight downwardly and does not get pulled out of the strike zone. Don't do annihilation more while the bait is falling, trust me the senko is doing the work for you thanks to its incredible action.

‍Watch your line very carefully during this phase. Because you are fishing on a semi-slack line you often will non feel the seize with teeth but will rather detect your line moving in an unusual direction, this means that a bass has picked up your bait and is swimming away with it! When y'all find this happening, air current down the slack quickly and set the hook. Fish on!

‍

Call back

As stated above most bites on this presentation take place on the fall. However, if you do non get a seize with teeth on the fall it is withal worth keeping the bait in the strike zone for a few seconds. Simply lift your rod tip and let the bait fall back downwardly a couple times. Frequently this will arm-twist a strike from a passing bass. Once you have repeated this a couple times without a bite, reel in and cast at the next target.

‍

This guy took this three inch Gary Yamamoto Fat Senko (Full general's Melon colour) as before long as it hit the water!

‍

Wrapping Up

This truly is one of those baits y'all cannot go wrong with. It gets bites all year round and is a elementary technique to implement. Information technology may not exist as exhilarating as throwing a crankbait or pitching a jig down the bank but it is worth putting some time into mastering this technique. If you practice, you will become bites on any body of water at whatever time of the yr.

If you would like to learn more about the Gary Yamamoto Senko, check out our total review. Nosotros accept put together fundamental information on the product based on real customer feedback.